Consumables
-
Abrasive Hand Pads
-
Abrasive Papers
-
Air Hammer Chisels
-
Arc Welding
-
Backing Pads
-
Ball Joint Covers
-
Blades
-
Bonded Seals
-
Brakes
-
Breaker Steels, Points & Chisels
-
Buffing & Polishing
-
Buffing Wheels
-
Castor Wheels
-
Chemicals
-
Circlips
-
Clevis Pins
-
Compound & Polish
-
Cutting Discs
-
CVJ Boots
-
Detergents
-
Drill Bits & Sets
-
Dry Stone Wheels
-
E-Clips
-
Electrical
-
Emery Papers
-
Exhaust Mounts
-
Film
-
Flap Discs
-
Flap Wheels
-
Floor Grinding Blocks: 33
-
Fuel Filters
-
Glues, Adhesives & Sealants
-
Grease Fittings
-
Grease Nipples
-
Grinding Discs
-
Grinding Stones
-
Hog Rings
-
Hole Saws
-
Hose Clips
-
Janitorial
-
Linch Pins
-
Maintenance
-
MIG Welding
-
Multi-Tool Consumables
-
Needle Scaler Consumables
-
Nuts & Bolts
-
O-Rings
-
Oils & Lubricants
-
Oxyacetylene Welding
-
Paint
-
Paint Brushes
-
Parts Cleaning
-
Personal Hygiene
-
Plastic Welding Rods
-
Polycarbide Wheels
-
Preparation Pads
-
R-Clips
-
Repair Kits
-
Rivets
-
Roll Pins
-
Rope
-
Rotabors
-
Rotary Burrs
-
Sanding Belts
-
Sanding Discs
-
Sanding Sleeves
-
Saw Blades
-
Screws & Fixings
-
Shot Blasting
-
Solder
-
Speedfit Pneumatic System
-
Split Pins
-
Spot & Stud Welding
-
Spray Gun Filters
-
Staples, Nails & Hoops
-
Steel Wool
-
Stripe Removal Pads
-
Tapes
-
Threaded Inserts
-
Tools & Accessories
-
Trim Clips
-
Tyre & Wheel Maintenance
-
Washers
-
Wet Stone Wheels
-
Wire Brushes
-
Wire Wheels
Sort
Showing 2831 of 2831 Products
Consumables
Showing products 1 to 96 of 2831
£56.95
• Kit includes PE backed floor mat, disposable seat, steering wheel, handbrake and gear lever covers.• Ideal for protecting the vehicle"s interior from dirt, grease and oil whilst servicing, valeting or when bodyshop work is undertaken.• Suitable for most cars and light commercial vehicles.
£11.95
• Versatile, long lasting abrasive finishing pads.• Flexible for contoured work surfaces.• Provides even finish.• Waterproof and solvent resistant.• Can be cut-to-size.
£11.45
• Versatile, long lasting abrasive finishing pads.• Flexible for contoured work surfaces.• Provides even finish.• Waterproof and solvent resistant.• Can be cut-to-size.
£11.45
• Versatile, long lasting abrasive finishing pads.• Flexible for contoured work surfaces.• Provides even finish.• Waterproof and solvent resistant.• Can be cut-to-size.
£12.95
• Suitable for Model No"s HS102 and HS102K Hot Air Guns.• Pack of 36.
£6.45
• Standard fuse holder for quick and easy installation of an accessory circuit.• Simply remove an existing fuse and insert the fuse holder.• Contains two fuse slots, one for the vehicles existing fuse and a second fuse slot for the accessory.• Made from nylon and supplied with 150mm of 16 gauge wire.• Maximum Rated Current: 15A.
£7.25
• Micro fuse holder for quick and easy installation of an accessory circuit.• Simply remove an existing fuse and insert the fuse holder.• Contains two fuse slots, one for the vehicles existing fuse and a second fuse slot for the accessory.• Made from nylon and supplied with 150mm of 16 gauge wire.• Maximum Rated Current: 15A.
£7.25
• Micro II fuse holder for quick and easy installation of an accessory circuit.• Simply remove an existing fuse and insert the fuse holder.• Contains two fuse slots, one for the vehicle"s existing fuse and a second fuse slot for the accessory.• Made from nylon and supplied with 150mm of 16 gauge wire.• Maximum Rated Current: 15A.
£6.45
• Mini fuse holder for quick and easy installation of an accessory circuit.• Simply remove an existing fuse and insert the fuse holder.• Contains two fuse slots, one for the vehicles existing fuse and a second fuse slot for the accessory.• Made from nylon and supplied with 150mm of 16 gauge wire.• Maximum Rated Current: 15A.
£4.95
• Zinc plated acme screw washer faced.• Supplied in resealable bag.• BS 6982C.• Pack of 50.
£5.95
• Zinc plated acme screw washer faced.• Supplied in resealable bag.• BS 6982C.• Pack of 50.
£11.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 100.
£13.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 100.
£8.85
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 50.
£14.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 100.
£17.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 100.
£19.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 100.
£4.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 50.
£10.95
• Zinc plated acme screw with captive washer.• Supplied in resealable bag.• BS 7976/6903/B.• Pack of 100.
£69.95
• Sheet metal screw (Acme bolt) assortment.• Captive washer.• BS 4174CZ.• Quantity: 300.• Supplied in a partitioned box.
£3.75
• Converts Model No. SM201 cleaning brush for use with Model No. SM40.
£109.95
• Combination kit featuring the most popular adhesives and sealants.• Includes thread, nut and stud lock, quick set metal and epoxy, super glues along with gasket and air/brake line sealants.• Ideal for the workshop or mobile engineers and mechanics.• Supplied in a tough storage case.
£69.95
• Transparent heat shrink terminals.• Adhesive lined.• Assortment of ring, butt, male and female spade and push-on terminals.• Colour-coded blue, red and yellow.• Supplied in partitioned box.
£10.95
• Instant at low pressure.• Used for fine and coarse threads up to 75mm(3") in diameter.• 60 hours to full cure, allows time to re-align joints.• Contains PTFE.• Tear and shred resistant.• Concertina applicator.
£17.45
• Suitable for use with .401" Parker taper chisels.• Quick release feature allows fast and easy interchanges.• Compatible with the Sealey air hammer range and other leading air tool suppliers.
£36.95
• Made from HNBR.• Designed for use with Freon R134a and R1234YF gas making them suitable for automotive air conditioning units and many other applications.
£8.75
• Air conditioning sanitizer.• Eliminates odours from air-con and heating system.• Cleans system leaving it fresh and germ free.• Apple fresh fragrance.• Single can treatment.
£47.95
• Air conditioning sanitizer.• Eliminates odours from air-con and heating system.• Cleans system leaving it fresh and germ free.• Apple fresh fragrance.• Single can treatment.
£5.70
• Suitable for Model No"s SA11, SA12/S, GSA11, GSA12, SA50, SA613, SA614 and other leading brands of air hammer.• Chisels have .401" Parker taper shanks.
£6.80
• Suitable for Model No"s SA11, SA12/S, GSA11, GSA12, SA50, SA613, SA614 and other brands of air hammer.• Chisels have .401" Parker taper shanks.
£5.70
• Suitable for Model No"s SA11, SA12/S, GSA11, GSA12, SA50, SA613, SA614 and other brands of air hammer.• Chisels have .401" Parker taper shanks.
£11.95
• HSS Air saw blades suitable for Sealey and other leading makes of air saw.
£16.95
• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of five.
£11.95
• HSS Air saw blades suitable for Sealey and other leading makes of air saw.
£11.95
• HSS Air saw blades suitable for Sealey and other leading makes of air saw.
£13.95
• Maintain your air tools with a quality high performance air tool oil containing mineral lubricants and detergents.
£126.95
• Maintain your air tools with a quality high performance air tool oil containing mineral lubricants and detergents.
£8.45
• Maintain your air tools with a quality high performance air tool oil containing mineral lubricants and detergents.
£82.95
• Maintain your air tools with a quality high performance air tool oil containing mineral lubricants and detergents.
£7.95
• Hot melt glue sticks suitable for Sealey and other popular makes of glue guns.• Overall Size: Ø7 x 100mm each.
£6.45
• Hot melt glue sticks suitable for Sealey and other popular makes of glue guns.• Overall Size: Ø11 x 100mm each.
£10.45
• Permanently repairs curb damage, scratches, slight dents and sanding marks on alloy, composite and steel rims as well as hubcaps.• Kit includes everything required to fix scuffs and scratches simply and quickly.
£10.95
• Aluminium (copper free) anti-seize compound.• For use on all studs, nuts, bolts and other threaded connections.• Formulated to be used in extreme environments of heat up to 760°C.
£18.45
• Aluminium blind rivets.• Standard flange.• Manufactured to DIN 7337.
£20.95
• Aluminium blind rivets.• Standard flange.• Manufactured to DIN 7337.
£24.95
• Aluminium blind rivets.• Standard flange.• Manufactured to DIN 7337.
£43.95
• For mitre/radial arm crosscutting of wood, aluminium and plastic; fine finish.• Supplied with two reducing bushes, making the blade suitable for 24mm & 18mm bore machines.
£19.45
• Top quality wound welding wire manufactured to BS EN ISO 14341:2008.
£65.95
• Top quality wound welding wire manufactured to BS EN ISO 14341:2008.
£60.95
• Top quality wound welding wire manufactured to BS EN ISO 14341:2008.
£15.95
• Aluminium multi-grip rivets.• Large flange.• Manufactured to DIN 7337.
£18.45
• Aluminium multi-grip rivets.• Large flange.• Manufactured to DIN 7337.
£9.95
• Aluminium multi-grip rivets.• Large flange.• Manufactured to DIN 7337.
£4.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£11.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£5.45
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£12.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£6.25
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£13.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£7.45
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£16.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£8.45
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£10.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£21.95
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£14.45
• Aluminium multi-grip rivets.• Standard flange.• Manufactured to DIN 7337.
£15.45
• Aluminium peel back type rivets.• Standard flange.• Manufactured to DIN 7337.
£18.45
• Aluminium peel back type rivets.• Standard flange.• Manufactured to DIN 7337.
£15.45
• Black anodised aluminium rivets.• Large flange.• Manufactured to DIN 7337.
£17.25
• Black anodised aluminium rivets.• Large flange.• Manufactured to DIN 7337.
£19.45
• Black anodised aluminium rivets.• Large flange.• Manufactured to DIN 7337.
£22.95
• Black anodised aluminium rivets.• Standard flange.• Manufactured to DIN 7337.
£26.45
• Black anodised aluminium rivets.• Standard flange.• Manufactured to DIN 7337.
£8.75
• Black anodised aluminium rivets.• Standard flange.• Manufactured to DIN 7337.
£10.75
• Black anodised aluminium rivets.• Standard flange.• Manufactured to DIN 7337.
£14.45
• Black anodised aluminium rivets.• Standard flange.• Manufactured to DIN 7337.
£5.95
• Angled razor blade suitable for use with Sealey Razor Scrapers Model No"s AK52507, AK52504 and VS500.
£36.95
• Anti-slip tape.• High contrast black.• 50mm x 18m.
£49.45
• Anti-slip tape.• Highly visible black and yellow hazard stripes.• 50mm x 18m.
£8.95
• Extremely effective anti-spatter spray preventing spatter build-up on fixings, jigs and welding nozzles.• Contains rust inhibitor to prevent corrosion.• Innovative pressure spray system allows 99% of the active product to be expelled from the can.• Up to six times the life of normal aerosols.• Safe to use• Non-toxic• No acrid fumes• Cleaner, easier and tidier welding• Environmentally friendly• Recyclable tin
£11.95
• Arbor with pilot drill for hole saws Ø32-152mm.
£49.95
• Also fits; Wacker - BH22, 23, EH22, 23, 24, BHF30S.
£44.95
• Also fits; Bosch - 11304, USH27, 11308, 12308, 12314, HSH10, HSH27, HSH28, USH27, HSB28, Makita - HM1303B, HM1304B.
£79.95
• Special diamond segments configured for improved cutting and wear rate.• Suitable for dry-cutting of very abrasive materials, including asphalt and tarmac.
£119.95
• Special diamond segments configured for improved cutting and wear rate.• Suitable for dry-cutting of very abrasive materials, including asphalt and tarmac.
£149.95
• Special diamond segments configured for improved cutting and wear rate.• Suitable for dry-cutting of very abrasive materials, including asphalt and tarmac.
£179.95
• Special diamond segments configured for improved cutting and wear rate.• Suitable for dry-cutting of very abrasive materials, including asphalt and tarmac.
£9.40
• Partitioned box with hinged lid, that overlaps all sides for additional strength when being transported.• Two snap latches for secure closure. • Supplied with 12 removable dividers, allowing the box to be separated in up to 18 compartments in various configurations. • Can be easily stacked for storage.
£4.15
• Partitioned box with hinged lid, that overlaps all sides for additional strength when being transported.• Two snap latches for secure closure. • Supplied with eight removable dividers, allowing the box to be separated in up to ten compartments in various configurations. • Can be easily stacked for storage.
£1.95
• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.
£2.95
• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.