Jacking & Lifting

Sort
Showing 38 of 38 Products
Jacking & Lifting
Showing products 1 to 38 of 38
Crane 1tonne Long Reach Extendable Legs
£399.95
• Delivered in knock-down form for reduced freight cost.• Heavy-duty front and rear castors are on extendable legs to give improved stability, particularly when operating at maximum jib extension of 1500mm.• Side pump access with removable handle.
Creeper Side Tray
£9.95
• Durable tool tray designed to fit onto the side of most steel framed creepers.• Magnetic base holds smaller components in place, keeping them to hand while working under a car.• Generous "lip" hooks over most frame sizes to allow easy fitting (fixings included).• Thumbscrew fixing allows easy fitting and removal of tray from creeper.
Engine Stand 350kg
£94.95
• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360° for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.
Engine Stand 450kg
£129.95
• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.
Engine Stand 550kg
£154.95
• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.
Engine Support Beam 300kg
£114.95
• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.
Engine Support Beam 500kg
£139.95
• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.
Engine Support Beam 500kg Capacity Double Support
£162.95
• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms.• Supplied with two short lengths of chain.
Engine Support Beam 600kg Heavy-Duty
£199.95
• Suitable for heavy engines including 6-cylinder variants.• Supports engine during maintenance operations including engine mounting replacement.• Beam is supported on two rubber covered feet with third, height-adjustable foot, resting on the front of the vehicle.• Supplied with two short lengths of chain.
£199.95
• Designed to support and assist to accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms.• This model has the additional advantage of a 360° adjustable rotating cross beam to enable a greater range of support options when in use.
Exhaust Support Stand 750kg Capacity
£154.95
• Screw adjustment with easy-to-use spinner nut.• Ball bearing thrust race for smooth operation.• Removable base for easier storage.• Adjustable over a 668mm range.
Fixed Frame Crane 3tonne
£739.95
• Lifts 3000kg at 1200mm jib extension.• Heavy-duty castors.• Perfect for heavy commercial, industrial and workshop use.• Extendable heavy-duty legs for improved stability, particularly when operating at maximum jib extensions.• Pump access from side for safe handling of heavy loads.• Delivered in knock-down form for reduced freight cost.• Some self-assembly required.
Folding Crane 2tonne
£429.95
• Lifts 2000kg at 930mm jib extension.• Folds for easy storage, freeing valuable workshop space when not in use.• Bottle jack type hydraulic unit for economy.• Some self-assembly required.
Folding Engine Crane 1tonne
£799.95
• 1tonne Folding crane with heavy-duty forged hook.• Fast folding for easy storage and transportation. • Low entry with a height of only 80mm at the wheels.• Weighs 124kg and is perfect for professional workshop use.• Beam can be set in 3-positions, allowing a lifting capacity from 700kg to 1000kg.• 300° Rotating pump handle aids use where space is limited.
Folding Engine Crane 1tonne Low Profile
£399.95
• Low entry engine crane with a height of only 80mm at the wheels.• Fast folding for easy storage and transportation.• Heavy-duty nylon castors.• Features 270° rotating pump with a lift control system and a dead man"s load release for safety.
Folding Engine Stand 900kg
£259.95
• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360° for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Features foldable legs for easier storage and transport.
Front Marker Lamp 12-24V LED
£8.45
• White front marker light is dual voltage 12/24V for car and commercial.• Fitted with 15cm length of 2-core cable.• Waterproof and E-Marked approved.
High Level Commercial Vehicle Support Stand 12tonne
£669.95
• Heavy-duty 12tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.
High Level Commercial Vehicle Support Stand 7tonne
£569.95
• Heavy-duty 7tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.
High Level Supplementary Support Stand 2tonne Capacity
£179.95
• All steel stand with pin and chain load support and full width crutches for safe support of load.• Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle.• Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.
High Level Supplementary Support Stand 4tonne Capacity
£199.95
• All steel stand with pin and chain load support and full width crutches for safe support of load.• Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle.• Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.
Jacking Beam 2tonne with Arm Extenders & Flat Roller Supports
£1,149.95
• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.
Jacking Beam 3tonne with Arm Extenders & Flat Roller Supports
£1,349.95
• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.
Lighting Cluster Rear Square LED 12V
£15.95
• Easy install and modern direct replacement.• Five function SMD LED rear cluster includes - Stop/Tail/Indicator/Numberplate Illumination/Reflector.• E-Mark, CE and R10 Approved.
Portable Pivot Car Lift 1500kg
£629.95
• Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism).• During raising it can be stopped at any height before locking the vehicle out level.• Once raised it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle).• Adjustable width settings allows narrow chassis cars to be lifted, such as MGs and other small classic cars.• Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure.
Premier Engine Crane 3tonne - Fixed
£2,899.95
• Professional 3tonne fixed crane with parallel legs, designed to accommodate a standard size pallet and features heavy-duty forged hook.• Lowers rapidly with no load, whilst providing smooth, controlled lowering under load conditions. • Beam can be set in 4-positions, with a capacity of 2000kg at its full extension of 1870mm.• Crane features two pumps one for slow, safe controlled lifting and a quick lift pump.• Weighs 299kg and is suitable for workshop use.
Premier Folding Engine Crane 1tonne
£969.95
• Professional 1tonne folding crane with parallel legs for various lifting situations and heavy-duty forged hook.• Features dead man"s control to prevent accidental lowering.• Lowers rapidly with no-load whilst providing a smooth, controlled lowering under load conditions.• Beam can be set in 4-positions, with a capacity of 700kg at its full extension of 1300mm. • Fast folding for easy storage and transportation.• 225° Rotating pump handle aids use where space is limited. • Weighs 81kg and is suitable for workshop use or by the serious motoring enthusiast.
Premier Folding Engine Crane 2tonne
£1,399.95
• Professional 2tonne folding crane with parallel legs for various lifting situations and heavy-duty forged hook.• Features dead man"s control to prevent accidental lowering.• Lowers rapidly with no-load whilst providing a smooth, controlled lowering under load conditions.• Beam can be set in 4-positions, with a capacity of 1250kg at its full extension of 1610mm.• Fast folding for easy storage and transportation.• 225° Rotating pump handle aids use where space is limited.• Weighs 145kg and is suitable for workshop use or by the serious motoring enthusiast.
Rear Fog Lamp 12-24V LED
£15.95
• 19 x SMD LED rear fog lamp is waterproof and E-Marked approved.• Dual voltage 12-24V for car and commercial.• Transparent lens.• Lamp supplied with twin cables.
Rear Rectangle Lamp Cluster (Pair) LED 12V
£84.95
• Easy install and modern direct replacement set.• 6-Function SMD LED rear cluster set includes - Stop/Tail/Indicator/Numberplate Illumination/Reflector/Rear Fog (left)/Reverse (right).• E-Mark, CE and R10 Approved.
Reverse Lamp 12-24V LED
£13.95
• 19 x LED reverse lamp is waterproof and E-Marked approved.• Dual voltage 12-24V for car and commercial.• Transparent lens.• Lamp supplied with twin cables.
Side Marker Lamp 12-24V LED
£8.45
• Amber side marker light is dual voltage 12-24V for car and commercial.• Fitted with 15cm length of 2-core cable.• Waterproof and E-Marked approved.
Side Marker Lamp Dual Lens 12-24V LED
£14.95
• 6 x SMD LED dual marker lamp.• Dual voltage for car and commercial.• EPDM high quality rubber fitted with a white lens on the front and red lens on the rear.• Fitted with 2-core cable.• E-Marked approved.
Stalk Side Marker Lamp LED 45° 12-24V (Left)
£19.95
• 6 x SMD LED dual marker lamp (left).• Dual voltage 12-24V for car and commercial.• EPDM high quality rubber fitted with a white lens on the front and red lens on the rear.• Fitted with 2-core cable.• E-Marked approved.
Stalk Side Marker Lamp LED 45° 12-24V (Right)
£19.95
• 6 x SMD LED dual marker lamp (right).• Dual voltage 12-24V for car and commercial.• EPDM high quality rubber fitted with a white lens on the front and red lens on the rear.• Fitted with 2-core cable.• E-Marked approved.
Static Mounted Crane 900kg
£339.95
• Manufactured from heavy-duty steel with a powder coated finish for added corrosion resistance.• Features a unique 360° swivel base for easy rotation.• Threaded locking arm allows the crane to be locked in place when not in use.• Mounts easily onto any strong and stable surface including loading bays, 4x4s, flatbed trucks and trailers.• Robust lifting ram enables a maximum capacity of 900kg when the lifting boom is retracted and 250kg when fully extended.• Includes heavy-duty chain and hook.• Hook features safety clip to help prevent load sling from slipping.
Vehicle Lift 1.5tonne Air/Hydraulic with Foot Pedal
£1,099.95
• Fitted with air/hydraulic motor and foot pump.• Heavy-duty steel construction.• Includes adaptors to lift via wheel or car body.• Can be used for lifting cars, off-road vehicles and vans.• The vehicle can be lifted from the side, front, back or wheels with supplied adaptor.• The unit offers significant assistance with bringing vehicles into an ergonomic working position.• Ideal for a wide variety of applications including welding, grinding and painting.
Vehicle Lift 2.5tonne Air/Hydraulic
£1,849.95
• Manoeuvrable low profile lift with retracting wheels for easy positioning under vehicles.• Air/hydraulic pulse pump operating system.• Four multi-positioning, height-adjustable saddles with rubber pads.• Maximum lift of 1060mm with six height locking positions.• Suitable for use with a wide range of vehicles.