Motorcycle Tools

Sort
Showing 180 of 180 Products
Motorcycle Tools
Showing products 1 to 96 of 180
Adjustable C Spanner - Hook & Pin Wrench Set 11pc
£49.95
• Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish.• Specially designed for use with slotted retaining rings.• Hook and pin interchangeable hinged arms with three wrenches covering sizes 19-121mm. Pin sizes Ø4-8mm.• Supplied in tough storage case.
Adjustable C Spanner - Hook & Pin Wrench Set 3pc 19-51mm
£11.95
• Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish.• Specially designed for use with slotted retaining rings.• Hook and pin interchangeable hinged arms.
Adjustable C Spanner - Hook & Pin Wrench Set 4pc 32-76mm
£19.95
• Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish.• Specially designed for use with slotted retaining rings.• Hook and pin interchangeable hinged arms.
Adjustable C Spanner - Hook & Pin Wrench Set 4pc 51-121mm
£23.95
• Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish.• Specially designed for use with slotted retaining rings.• Hook and pin interchangeable hinged arms.
Aluminium Loading Ramps 680kg Capacity per Pair
£289.95
• Manufactured from strong durable yet lightweight aluminium.• Provides safe and easy ramp access for a variety of small vehicles.• Suitable for loading/unloading quad bikes, ride-on lawnmowers or any other four wheeled vehicle up to a maximum of 680kg.• Features extended claws at one end to help secure ramp when in use.• Folding design for compact storage.
Bobbin Supports for RPS2
£12.95
• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.
Bridge Bearing Puller Set 10pc
£107.45
• 10pc Screw-type bridge extractor set.• The thin tapered lips on the collets secure a positive grip on the curved surface of the internal bearing bore.• Gently removes blind bearings where the use of a slide hammer may damage the surrounding material.• Bearing extractor collets with internal capacity from 8 to 27mm.
Calibration Rig for MS070
£109.95
• Used to check and adjust the alignment of the lasers on Model No. MS070 Motorcycle Wheel Laser Aligner.• This unit will allow workshops to check and adjust in-house.• Supplied with comprehensive instructions.
Combination Cable Lock
£6.45
• Lightweight and convenient enough to carry in a pocket.• Simple 3-digit combination retracting cable lock can be used in various daily situations to secure items and belongings.• Uses 950mm long, Ø1.4mm cable to secure cycle helmet or bags to the cycle, pushchair or buggy to a secure location or for securing a crash helmet or jacket to motorcycle, (Note this is not a motorcycle security product).• Retract button to reel cable in for easy storage, or to shorten length of cable when locked.
Creeper Seat Tool Kit Combo
£153.95
• Mobile utility seat, toolbox solution for keeping commonly used tools to hand.• Features two folding side trays and screwdriver storage rack.Package includes:• SCR18 - Mechanic"s Utility Seat & Toolbox• AK69911 - Socket Set 11pc 3/8"Sq Drive Total Drive®• S0852 - Ratchet Wrench 3/8"Sq Drive Comfort Grip Flip Reverse• S0615 - Soft Grip Screwdriver Set 6pc• AK4314 - Screwdriver Set 4pc JIS• S01063 - Combination Spanner Set 33pc - Metric/Imperial• S0484 - Hex Key Set 30pc Long/Short Arm - Metric/Imperial• S0645 - Comfort Grip Pliers Set 3pc• S01058 - Circlip Pliers Set 4pc Internal/External• SHC500 - Hand Cleaner 500ml Lemon Zing (x2)• You may also refer to the individual Model No. for full specification.
Deluxe Tyre Lever 375mm
£9.95
• Quality drop-forged and tempered steel with flat rounded tip.• Moulded handle enables extra grip.• Suitable for use with motorcycle, small agricultural or leisure tyres.
Disc Brake Opening Tool
£21.95
• Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement.• Features moulded rubber handle enabling extra grip.
Double Hook-End C-Spanner 36-42mm/45-50mm
£10.95
• Combination hook-end C-spanner for use with headstock adjustment and rear suspension adjustment.• Suitable for a variety of motorcycles.• Small End 36-42mm, Large End 45-50mm.
Engine Rebuild Stand - Multi-Cylinder 100kg
£137.95
• Suitable for supporting large multi-cylinder engines (maximum weight 100kg).• The supports can rotate for accessibility to all parts of the engine.• Width and length adjustable.• Engine stand"s frame elongates to allow adjustment for length between mounting points.
Extension Side Ramps for MC680E 4pc
£269.95
• All steel construction four piece ramp extension kit for Model No. MC680E Motorcycle Lift.• Converts motorcycle lift into a 2000mm x 1260mm 680kg mini tractor/quadbike or ATV lift.• Consists of two lift table extensions and two additional loading ramps.• Fitted with automatic anti-roll off devices.
Fork Cap Spanner 46 & 50mm
£11.95
• Combination fork cap spanner suitable for use on Kayaba, Showa and twin camber forks.
Fork Cradle Supports for Front Paddock Stands
£7.95
• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance.• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.
Fork Seal Driver
£64.95
• Designed for easy installation of fork seals.• Limits potential damage caused by other installation methods to the forks.
Fork Seal Driver Ø45-54mm
£63.95
• Designed for easy installation of fork seals.• Limits potential damage caused by other installation methods to the forks.
Front Headstock Stand
£124.95
• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds down for compact storage when not in use.• Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.
Hydraulic Motorcycle Lift 450kg Capacity
£819.95
• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 405mm, 555mm and 660mm to prevent accidental lowering.• Suitable for use with centre stand motorcycles or with paddock stand.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.
Locating Pin for RPS3S Ø25.5mm
£9.95
• Ø25.5mm Locating pin for Model No. RPS3S Single Sided Rear Support Stand.
Locating Pin for RPS3S Ø27.5mm
£10.95
• Ø27.5mm Locating pin for Model No. RPS3S Single-Sided Rear Support Stand.
Locating Pin for RPS3S Ø28.5mm
£12.95
• Ø28.5mm Locating pin for Model No. RPS3S Single-Sided Rear Support Stand.
Locating Pin for RPS3S Ø40.5mm
£19.95
• Ø40.5mm Locating pin for Model No. RPS3S Single-Sided Rear Support Stand.
Micro Air Compressor with Work Light 12V
£21.45
• Micro air compressor with delivery of 12.5L/min.• Integral storage for air output hose.• Features a work light.• Pressure gauge reads up to 5.5bar(80psi).• 12V motor suitable for inflating tyres on motorcycles and cars.• Supplied with vehicle accessory socket plug and battery clips.
Mini Tractor/Quad/Motorcycle Lift 680kg Capacity Air/Hydraulic
£1,299.95
• All steel construction with heavy-duty hydraulic ram and air pump.• Supplied with separate, foot operated, hydraulic pump and reservoir unit.• Features two additional side platforms for extra width.• Ramp and platform made with chequer plate surface to ease loading and positioning of mini tractor/quad.• Supplied with motorcycle front wheel locking attachment, securing vehicle to provide easy maintenance access.• Fitted with multi-position safety lock to prevent accidental lowering.• Suitable for use with centre stand motorcycles or with paddock stand.
Motorcycle & Bicycle Wheel Balancer & Truing Stand
£179.95
• Professional dual purpose wheel balancer and truing stand.• Suitable for most motorcycle wheels.• Ideal for the workshop technician or competent DIY enthusiast.• Includes two cones and spindle for precise, easy alignment and balancing.• Enables the accurate balancing after tyre fitting and truing of rebuilt, warped or buckled spoke wheels.• Uses gravity to find the heavy point of a wheel and tyre.• Threaded centring stabilizer bolts to securely hold the wheel whilst truing the rim.
Motorcycle & Mini Tyre Changer
£299.95
• Manual type tyre changer suitable for a wide variety of tyres and wheels including those fitted to motorcycles, quad bikes, go-karts and golf buggies.• Works on bearing or hub centred wheels and is supplied with two centre posts.• Includes manual bead breaker and supplied with tyre bar for mounting and de-mounting.• Fast and simple operation.• To prevent damage to the rims of alloy wheels, it is essential to use an appropriate tyre bar.
Motorcycle & Quad Lift 680kg Capacity Hydraulic
£199.95
• Heavy steel construction with bottle jack style power unit.• Lifting arms suitable for lifting bikes with a suitable structure, quads, all terrain vehicles, trikes and transmissions.• Features mechanical safety lock to prevent inadvertent lowering and stabiliser feet for added lifting control.• Mounted on two fixed wheels and two castors for manoeuvrability.
Motorcycle & Quad Scissor Lift 500kg Capacity Hydraulic
£259.95
• Steel construction scissor with bottle jack style power unit.• With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units, as well as the engine.• Benefits from being portable so can be used anywhere with a hard level floor, thus making this suitable for mobile motorcycle mechanics.• Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.
Motorcycle Bead Tool
£16.95
• A must for installing tyres on spoked wheels.• Hook slots around spoke and pushes bead down on opposite side of the tool.• The bead is held into position while fitting the tyre with tyre levers.• No more struggling to keep the bead down.
Motorcycle Centre Stand Moving Dolly
£49.95
• Use to manoeuvre motorcycles (up to 220kg vehicle weight) with centre-stands.• Perfect for places where space is restrictive.• The dolly is made from 4mm thick hardened steel-plate.• Covered with anti-slip rubber pad.• Foot operated built-in brake mechanism.• Ideal for workshop, showroom and home garage use.
Motorcycle Chain & Disc Lock 10.5 x 10.5 x 900mm 4* ART Approved
£42.95
• Heavy-duty 10.5mm square link chain, fitted with durable nylon sleeve for avoiding accidental scratching and damage to the bike.• Features hardened zinc alloy bodied disc lock with anti-drill, anti-saw and anti-pick protection on the locking cylinder.• 4* ART Approval.• Supplied with two keys.
Motorcycle Chain & Disc Lock 12 x 12 x 900mm
£29.95
• Heavy-duty 12mm square link chain, fitted with durable nylon sleeve for avoiding accidental scratching and damage to the bike.• Features extra-long 12mm thick shrouded shackle with anti-drill, anti-saw and anti-pick protection on the locking cylinder.• Supplied with two keys.
Motorcycle Chain Lock 10mm x 1.5m
£26.95
• Protective covered chain, avoids accidental scratching and damage to the bike.• Triple bearing locking system encased in a double protection body, helps prevent tampering.• Supplied with two keys.
Motorcycle Chain Splitter & Riveting Tool Set - Heavy-Duty
£39.95
• Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links.• Set is also ideal for use on horticultural and agricultural machinery.• Includes tools designed for riveting and plate holder for connecting links accurately.
Motorcycle CO2 Emergency Tyre Inflator Kit
£23.95
• CO2 Tyre inflator kit including adaptor for Schrader type valves (used by most cars and motorcycles and some bicycles).• 2 x 16g Canisters of CO2.• Supplied in zipped storage pouch.
Motorcycle Coil Spring Compressor
£57.45
• Essential for the assembly and disassembly of suspension units.• Suitable for most types of classic and modern motorcycle coil springs.• Supplied with four spare plastic spring protectors in metal storage case.• Use with ratchet wrench.
Motorcycle Cover Large 2460 x 1050 x 1370mm
£31.95
• Ideal for protection, rain or shine, against weathering and fading.• Double layer cover for extra protection.• Inner layer is made from soft anti-scratch material to protect motorcycle"s paintwork.• Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply.• Elastic corners with strap and buckle for easy and secure fitting.• Eyelet enabling wheel lock to be fitted.• Supplied in a storage bag.
Motorcycle Cover Medium 2320 x 1000 x 1350mm
£29.95
• Ideal for protection, rain or shine, against weathering and fading.• Double layer cover for extra protection.• Inner layer is made from soft anti-scratch material to protect motorcycle"s paintwork.• Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply.• Elastic corners with strap and buckle for easy and secure fitting.• Eyelet enabling wheel lock to be fitted.• Supplied in a storage bag.
Motorcycle Cover Small 1830 x 890 x 1300mm
£27.95
• Ideal for protection, rain or shine, against weathering and fading.• Double layer cover for extra protection.• Inner layer is made from soft anti-scratch material to protect motorcycle"s paintwork.• Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply.• Elastic corners with strap and buckle for easy and secure fitting.• Eyelet enabling wheel lock to be fitted.• Supplied in a storage bag.
Motorcycle Coverall - Large with Solar Panel Pocket
£52.95
• A fully enclosed cover; the two halves zip together to completely protect the motorcycle, rain or shine, against weathering and fading.• Double layer 190T silver polyester cover for extra protection.• Base is made from hard-wearing 420D with PVC coating.• Inner layer is made from soft anti-scratch material to protect motorcycle"s paintwork.• Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply.• The cover has side vent holes to aid air circulation.• Supplied in a storage bag.
Motorcycle Coverall - Medium with Solar Panel Pocket
£47.95
• A fully enclosed cover; the two halves zip together to completely protect the motorcycle, rain or shine, against weathering and fading.• Double layer 190T silver polyester cover for extra protection.• Base is made from hard-wearing 420D with PVC coating.• Inner layer is made from soft anti-scratch material to protect motorcycle"s paintwork.• Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply.• The cover has side vent holes to aid air circulation.• Supplied in a storage bag.
Motorcycle Coverall - X-Large with Solar Panel Pocket
£57.95
• A fully enclosed cover; the two halves zip together to completely protect the motorcycle, rain or shine, against weathering and fading.• Double layer 190T silver polyester cover for extra protection.• Base is made from hard-wearing 420D with PVC coating.• Inner layer is made from soft anti-scratch material to protect motorcycle"s paintwork.• Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply.• The cover has side vent holes to aid air circulation.• Supplied in a storage bag.
Motorcycle Disc Brake Lock Ø10mm
£14.95
• Features hardened locking pin and impact resistant die-cast body.• Visible bright colour acts as a reminder that the unit is attached to the bike.• Supplied with two keys and storage pouch.
Motorcycle Disc Brake Lock Ø6mm
£8.45
• Features hardened locking pin and impact resistant die-cast body.• Visible bright colour acts as a reminder that the unit is attached to the bike.• Ø6mm Locking pin is designed to pass through the holes in the brake disc.• Small and compact, ideal for keeping in your jacket pocket.• Supplied with two keys and storage pouch.
Motorcycle Disc Lock Chain 8 x 8 x 800mm
£13.45
• Heavy-duty 800mm chain with 8mm square links.• Fitted with durable nylon sleeve for preventing accidental scratching and damage to the bike.• Ideal for creating a slip knot between detachable lock and an object.• Suitable for use with Model No. DL503 Disc Brake Lock.
Motorcycle Dolly - Side Stand Type
£169.95
• Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg.• Easy manoeuvring around the workshop or garage.• Front and rear lever operated wedge gates allow for easy loading and unloading. • 5-Position side stand platform to fit varied length side stands.• Features front/rear steel pins, to keep the motorcycle on the dolly during moving, and smooth-rolling dual castor wheels.
Motorcycle Dolly Rear Wheel - Long Side Stand Type
£159.95
• Motorcycle dolly holds a single cruiser/custom motorcycle with a side stand, weighing up to 300kg.• Easy to manoeuvre around the workshop or garage.• Front wheel stays in contact with the ground allowing the motorcycle to be steered into the desired position.• Pivoting feature allows flexibility in side stand designs.
Motorcycle Dolly Rear Wheel - Side Stand Type
£149.95
• Motorcycle dolly holds a single motorcycle or sports bike with a side stand, weighing up to 300kg.• Easy to manoeuvre around the workshop or garage.• Front wheel stays in contact with the ground allowing the motorcycle to be steered into the desired position.• Pivoting feature allows flexibility in side stand designs.
Motorcycle Fork Oil Level Gauge with Top-Up Syringe
£39.95
• Specialized tool designed for checking and adjusting oil levels on all conventional and single chamber cartridge motorcycle forks.• Supplied with adjustable ring and oil pipe to measure oil levels from 0-290mm in 5mm increments.• Features top-up syringe with 70ml capacity.• Can also be used on bicycles equipped with front suspension.
Motorcycle Fork Seal Driver 33mm
£34.95
• Professional seal driver for 33mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 35-36mm
£33.95
• Professional seal driver for 35-36mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 39mm
£37.95
• Professional seal driver for 39mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 41mm
£36.95
• Professional seal driver for 41mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 43mm
£37.95
• Professional seal driver for 43mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 45mm
£36.95
• Professional seal driver for 45mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 46-47mm
£36.95
• Professional seal driver for 46-47mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 48mm
£38.45
• Professional seal driver for 48mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 49-50mm
£38.45
• Professional seal driver for 49-50mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Seal Driver 54mm
£38.45
• Professional seal driver for 54mm diameter forks.• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.• Limits potential damage to the forks caused by using other methods.
Motorcycle Fork Spring Compressor
£107.45
• Designed to relieve fork spring tension allowing removal of the tube caps from the rod, without damaging the threads.• Can be used with the fork in situ or on the bench.• Use with 17mm socket.
Motorcycle Front Wheel Chock
£64.95
• Features adjustable pivoting wheel guide, which secures front wheel within chock.• Three adjustable heights depending on diameter of wheel.• Suitable for wheels with tyre widths 90-130mm and diameters 17"-21"(430-535mm).• Base can be permanently bolted to the floor (fixings included), and features a detachable upper assembly that can be easily stored and re-attached when required, stabilising motorcycles without the need for side or centre stands. • Base features lashing strap gap for securing the bike in transport.
Motorcycle Front Wheel Chock Heavy-Duty
£99.95
• Tubular wheel chock made from square section steel, supports the front wheel of the motorcycle when in transit or storage.• Fully adjustable to fit wheels 15"-21"(380-535mm).• Minimum/Maximum tyre width: 50-130mm.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Chock can be used freestanding or fixed to any hard surface (fixings not included).• Please note: Motorcycle must also be secured using tie down straps.
Motorcycle Ground Anchor - 4 Security Bolts
£21.45
• Heavy-duty hardened steel bolt down anchor.• Supplied with all fixings.• Provides a secure locking point for items such as motorcycles, bicycles, boats, caravans and trailers.
Motorcycle Lift 365kg Capacity Hydraulic
£419.95
• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 500, 640 and 760mm to prevent accidental lowering.• Suitable only for motorcycles with a centre stand.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.
Motorcycle Lift 450kg Capacity Hydraulic
£669.95
• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with platform safety lock device to prevent accidental lowering.• Bike fixed by front wheel clamp.• Four eyelets allow tie downs to be used for added stability.• Fitted with a full width loading ramp.• 500mm Removable rear panel to assist with rear wheel removal.• Can be stored in an upright position to save space when not in use.
Motorcycle Lift 454kg Capacity Air/Hydraulic
£929.95
• All steel construction with air pump or foot pedal for manual operation.• Integral hydraulic pump and air motor assembly.• Fitted with platform safety lock device to fix platform at two working heights of 490 and 710mm to prevent accidental lowering.• Front wheel clamp for stability and sliding panel for easy rear wheel removal.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.• Suitable for use with centre stand motorcycles or with paddock stand.
Motorcycle Lift 454kg Capacity Hydraulic
£799.95
• All steel construction with heavy-duty, foot operated, integral hydraulic pump and ram assembly.• Fitted with platform safety lock device to fix at two working heights of 710mm and 490mm and to prevent accidental lowering.• Sliding panel platform and front wheel clamp assist removal of rear motorcycle wheel.• Platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and lock-downs to prevent lift moving during use.• Suitable for use with centre stand motorcycles or with paddock stand.
Motorcycle Lift 680kg Capacity Heavy-Duty Air/Hydraulic
£1,499.95
• All steel construction.• Combined air and foot pump separate from main lift for choice of operation.• Ramp and platform made with chequer plate surface to ease loading and positioning of motorcycle.• Supplied with motorcycle front wheel locking attachment, securing vehicle to provide easy maintenance access.• Fitted with multi-position safety lock to prevent accidental lowering.• Suitable for use with centre stand motorcycles or with paddock stand.
Motorcycle Lift 680kg Capacity Heavy-Duty Electro/Hydraulic
£1,899.95
• All steel construction with a 680kg capacity.• 230V Electro/Hydraulic lifting system for simple, fast operation.• Heavy-duty ramp and platform with removable rear access panel to aid with wheel removal.• Supplied with motorcycle front wheel locking attachment for tyre widths between 75-340mm to assist in securing the vehicle.• Fitted with multi-position safety lock to prevent accidental lowering.• Suitable for use with centre stand motorcycles or with a rear paddock stand.• Can be easily converted to a Mini Tractor, Quadbike lift with the additional side ramps Model No. MC680EXK.
Motorcycle Lift Off-Road/Trials Bikes 135kg
£279.95
• All steel scissor type construction with foot operation and integral hydraulic pump.• Unique foot design and safety pins allow use with off-road/trials bikes.• Features three locking heights.• Support platform with rubber top protects paintwork on bike.
Motorcycle Locking Ground Anchor - 4 Security Bolts
£49.95
• Heavy-duty hardened steel bolt down anchor with key operated locking pin.• Supplied with all fixings.• Provides a secure locking point for items such as motorcycles, bicycles, boats, caravans and trailers.
Motorcycle Portable Folding Workbench 360kg Capacity
£419.95
• Lightweight, folding design with wheels makes this work bench mobile and allows compact storage where workshop space is limited.• Working height of 460mm, ideal for servicing/maintenance.• Additionally the loading ramp doubles as a convenient workshop stool.• Suitable for professional workshops, mobile mechanics, enthusiasts, track days or as a display table in showrooms.
Motorcycle Rear Wheel Chock
£109.95
• Features adjustable pivoting wheel guide, which secures rear wheel within chock.• Four adjustable depths depending on diameter of wheel.• Suitable for wheels with tyre widths 130-180mm and diameters 14"-21"(355-535mm).• Frame bolts to the floor stabilising motorcycles without the need of side or centre stands.
Motorcycle Shock Bushing Driver Set 4pc
£14.95
• Enables shock bushes to be installed straight and fast.• Suits most bushes/shocks.• Supplied in holder.
Motorcycle Spindle Tool Set 3pc
£17.45
• Prevents spindle from spinning when tightening or loosening wheel nut.• Use appropriate socket on free end of tool to hold spindle.• Six sizes to fit a variety of motorcycle makes and models.
Motorcycle Steering Stem Bearing Race Removal Tool
£36.95
• Prevents damage associated with removal of stem bearing.• Universal tool works on most steering stem bearings ranging from Ø30-68mm.• Can be used in conjunction with Model No. VS1831 Steering Tube Bearing Installer.
Motorcycle Swingarm Lock Nut 4-Pin 37mm
£11.95
• Four tooth socket, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.
Motorcycle Swingarm Lock Nut Socket 4-Pin 30mm
£11.95
• Four tooth socket, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.
Motorcycle Swingarm Lock Nut Socket 4-Pin 42mm
£11.95
• Four tooth socket, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.
Motorcycle Swingarm Lock Nut Socket 4-Pin 43mm
£11.95
• Four tooth socket, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.
Motorcycle Swingarm Lock Nut Socket 4-Pin 48.5mm
£11.95
• Four tooth socket, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.
Motorcycle Swingarm Lock Nut Socket 4-Pin 50mm
£11.95
• Four tooth socket, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.
Motorcycle Swingarm Lock Nut Socket Set 6pc
£144.95
• Four tooth sockets, specially designed to remove castellated lock nuts found on motorcycle swingarms.• Also suitable for some engine mounting nuts.• Supplied in storage case.
Motorcycle Tyre Lever with Plastic Moulding 380mm
£17.95
• Quality Chrome Vanadium steel tyre lever with hard plastic moulding hook and taper ends.• Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres.
Motorcycle Tyre Lever with Plastic Moulding 500mm
£22.95
• Quality Chrome Vanadium steel tyre lever with hard plastic moulding hook and taper ends.• Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres.
Motorcycle Wheel Alignment Tool
£369.95
• Fast, simple and accurate alignment of rear wheel.• Optimises vehicle performance and set-up after installation or modification of the chain, sprockets, brakes or suspension components.• This fully portable kit is also ideal for track-day set-up or for the motorcycle enthusiast.
Motorcycle Wheel Balancer
£109.95
• Professional motorcycle wheel balancer.• Suitable for most motorcycle wheels.• Includes two cones and spindle for precise, easy alignment and balancing.• Uses gravity to find the heavy point of a wheel and tyre.
Motorcycle Wheel Chock 140mm
£21.45
• Black powder coated heavy-duty tubular frame.• Pre-drilled holes allow chock to be bolted to either floor or trailer to prevent movement while being worked on or transported.• Suitable for motorcycles with up to 140mm wide tyres.
Motorcycle Wheel Chock 165mm
£22.95
• Black powder coated heavy-duty tubular frame.• Pre-drilled holes allow chock to be bolted to either floor or trailer to prevent movement while being worked on or transported.• Suitable for motorcycles with up to 165mm wide tyres.
Motorcycle Wheel Chock 170mm - Fixed
£39.95
• Black powder coated heavy-duty tubular frame.• Pre-drilled holes allow chock to be either bolted to floor or trailer to prevent movement and maintain balance.• Suitable for motorcycles with up to 170mm wide tyres.
Motorcycle Wheel Chock 95mm
£18.95
• Black powder coated heavy-duty tubular frame.• Pre-drilled holes allow chock to be bolted to either floor or trailer to prevent movement while being worked on or transported.• Suitable for motorcycles with up to 95mm wide tyres.
Motorcycle Wheel Nut Socket 1/2"Sq Drive H22
£8.95
• Size: 1/2"Sq Drive, H22.• Length: 53mm.• Can be used for removing the front and rear wheels on modern motorbikes with internal Hex axle, suitable for maximum loads.• Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.
Motorcycle Wheel Nut Socket H24 1/2"Sq Drive
£9.95
• Size: 1/2"Sq Drive H24.• Length: 53mm.• Can be used for removing the front and rear wheels on modern motorbikes with internal hex axle, suitable for maximum loads.• Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.